Aftermarket & OEM Front Bumper Bracket
If the front bumper on your car, truck, or SUV appears to be sagging, this could be the result of a defective front bumper bracket. Front bumpers are heavy and must be supported correctly. We depend on bumpers to protect us and reduce the amount of damage to other automotive body components in the event of an accident. Front bumper brackets are the backbone of the bumper because they support it and hold it in its required position. Early detection and replacement is essential, because if not attended to a wide variety of on unpleasant situations may develop. If one of the brackets loses its integrity then the load applied to the other bracket is increased and if they both fail the bumper could fell off during vehicle operation. In the event of an accident, the bumper and bumper brackets are designed to absorb the impact limiting the extent of the damage that occurs. They deter damage to the frame of the vehicle, which is very important because frame repairs are very extensive and costly. Front end body damage is also greatly reduced by bumpers. Timely repairs and preventive maintenance to front bumper brackets provides safety for you and your family.
The construction and design of front bumper brackets depends on a lot of variables. The weight of the bumper determines the strength of the material required to support it. Each application determines the design required to accomplish the correct bumper position. They are bolted to the frame of the car, truck or SUV. Then the bumper is bolted to the front bumper brackets securing it properly. Some brackets are comprised of two or more separate pieces of metal that work together to facilitate the required mounting situation. This will also provide an even weight distribution reducing the amount of stress applied to each piece of metal.
To replace front bumper brackets
, the front bumper must be removed first to gain access to them and this process varies based on vehicle design. Applying penetrating oil to all the mounting bolts at least an hour or two earlier before starting this process will make it go more smoothly in most circumstances. This will also prevent damage to mounting bolts and reduce frustration in the long run. If you are working on a truck or SUV with a very heavy bumper, supporting it properly by using a jack or jack stands will increase the safety element of the process. On some vehicles you may need to disconnect electrical connectors for marker lights if applicable. After the bumper is removed then the front bumper brackets are accessible then they can be removed. Install the new brackets to the frame and then reinstall the bumper. During installation observe adjustment options because the bumper must be aligned correctly.
It is very critical that front bumper mounting brackets are correct for the specific application. They control the strength and proper alignment of the front bumper. Quality parts that fit appropriately will increase the dependability and appearance of your car, truck, or SUV. Cars Parts Discount has the right quality parts you need to accomplish repairs and they give you the quality service you deserve. CPD has an unmatched inventory for all of your automotive needs that includes front bumper brackets and anything else you need to accomplish repairs correctly.