Aftermarket & OEM Rear Bumper
Some vehicle components are recognized for their cosmetic value but do a lot more then enhance the appearance of the automobile and a prime example is a rear bumper. They must be maintained properly so they function correctly in the event of an accident. Most issues with bumpers are visible such as damage from a collision. When these devices are damaged they lose their ability to function effectively and it also downgrades the appearance of the car, truck or SUV. Bumpers should be inspected on a regular basis to verify serviceability. One of the most common enemies for a bumper assembly is rust and it isn't always easy to detect. When metal are infested with rust it will create deterioration and the strength of it is slowly reduced until it is totally gone. Due to its location rear bumpers collect dirt and moisture on a daily basis and this creates a perfect environment for rust to form and progress. They will rust from the inside to the outside in some circumstances which allows it go undetected. This situation hiders the ability of the rear bumper to absorb the impact of an incident that limits other damage to the vehicle and increases the safety of the occupants.
Rear bumpers are constructed using several different materials including steel, aluminum, rubber, and plastic. A lot of manufactures will use a combination of these materials to produce the appearance they desire. The purpose of a rear bumper is to reduce the amount of damage done to the other body components in the event of an accident. They absorb most of the impact reducing the strength of the impact limiting injuries to the passengers in the automobile. Trucks and SUV's normally have stronger rear bumpers to facilitate towing and when a rear end collision occurs the other guy normally gets the worst end of the stick.
replacement procedures vary based on the design and mounting methods incorporated. One thing they all have in common is the mounting bolts will require some assistance from some penetrating oil. You need to evaluate the situation to determine the best removal process. Something that is often forgotten is to disconnect the license plate light wire connector before you begin this procedure. On some cars, trucks and SUV's it is better to remove the bumper with the brackets attached. Before you remove any of the mounting bolts you must insure that the bumper is properly supported by using a floor jack or other appropriate method. If you removed the bumper with the brackets attached you will be required to remove them and install them on the new rear bumper prior to installation. Before completely tightening the mounting bolts you should check the alignment of the bumper insuring that it is level.
When selecting a new rear bumper for your vehicle you need to keep in mind that this is a very essential safety device. Nobody wants to be involved in a rear end collision, but in the event that it happens the better quality bumper you have will reduce the amount of damage. Car Parts Discount offers a large assortment of rear bumpers. They have OEM replacements and aftermarket options all at the best prices available with super-fast delivery. Maintaining your vehicles correctly increases their value and safety which is very important.